Flow sensors board v.1.1 with case


Flow sensors board with case

1 in stock


2 flow sensors can be connected to the board. Board supports flow rates from 150L/h up to 3500l/h – this is the limits for the measured flow rate values by SimACo controller but not for the flow rate sensor itself.

Requirements for the flow sensors:

  • board supports sensors with coefficients k from 4,8 to 11;
  • sensor must generate pulses in the output;
  • sensor must have three wires (“+”, “out”, “-“);
  • sensors must have npn or pnp transistor in the output. The output type must be selected by setting jumpers in the flow sensors board for each sensor;

YF-S201 and YF-B1 sensors were tested but other sensors should work if the corresponds to the requirements listed above.


There are no reviews yet.

Be the first to review “Flow sensors board v.1.1 with case”

Your email address will not be published. Required fields are marked *