LDD-H driver board v.1.1 without drivers and without case

6.06

LDD-H driver board without drivers and without case.
You can print case for driver board yourself. Download case drawings for free here.

1 in stock

Description

Four Mean Well LDD-XXXH series drivers can be soldered into LDD-H driver board. Board must be used with LEDs which requires constant current power supply. This board mostly can be used with powerful LED (1-3W) strings, connected in series or COB LEDs.

LDD-XXXH drivers main characteristics:

  • DC/DC step-down converter
  • Input voltage: 9 ~ 56VDC for LDD-300H…1000H drivers and 9 ~ 52V for LDD-1200H, LDD-1500H drivers
  • Output LED string voltage: 2 ~ 52VDC for LDD-300H…1000H drivers and 2 ~ 46V for LDD-1200H, LDD-1500H drivers
  • High efficiency up to 97%
  • Built-in EMI filter, comply with EN5 5015 and FCC part 15 without additional input filter and capacitors
  • Built-in PWM and remote ON/OFF control
  • Protections: Short circuit / Over temperature
  • Cooling by free air convection
  • Compact size
  • Low cost, high reliability
  • Fully encapsulated with IP67 level for pin and wire style

If you will order board and MeanWell drivers from MySimpleAutomation store, drivers will come already soldered into the board, you will not need to solder them yourself.

Reviews

There are no reviews yet.

Be the first to review “LDD-H driver board v.1.1 without drivers and without case”

Your email address will not be published. Required fields are marked *