SimACo downloads

Attention: SimACo configurator application and contoller firmware files are compressed into zip archives. You must extract them before installing them.
You always must use the same firmware and Angry Fish application versions. Downloading Angry Fish application from Google Play/ Microsoft Store you will get the new version automatically. There is no ability to switch to older version after installing it. So please update controller firmware first then download Angry Fish application!. This will ensure that everything will run smoothly. You can download SimACo configurator application here.

You can download the latest versions v.3.1.8.0 of Angry Fish application for Android devices from Google Play and Windows devices from Microsoft Store.


General build v.3.1.8.0 released. What’s new: returned function which allows to control aquarium LED lighting fan; aquarium filters now can be connected to any Device #1… #8 channels; a little changes to controller alarms.
SimACo firmware is here.


General build v.3.1.7.0 released. What’s new:
added Off15 mode icon to the Angry Fish application. Icon indicates that Off15 mode for channels Device #1 or Device #8 is active;
added animated icon which indicates successful data transmission through WiFi between PC/phone and SimACo controller;
increased logs data transmission speed from SimACo controller to PC/phone. In order to download logs data faster, logs selection logic was changed;
increased data transmission stability between PC/phone and SimACo controller through WiFi;
decreased “Channels status” and “Alarms” pages update interval from 3 sec to 0.3 sec.

SimACo firmware is here.


General build v.3.1.6.0 released. What’s new: added icons which shows active fertilizers dosing, ATO and AWC operations. Added ability to disable five 120-230V channels while AWC operation is active. SimACo firmware is here.


General build v.3.1.5.0 released. What’s new: added AWC (automated water change) function. Removed capability to activate LED modules cooling fan when LED temperature has raised: now there is a possibility to measure LED temperature only. SimACo firmware is here.


Case v.1.0 for SimACo controller and all additional boards is created. You can print the box from STL files. Files are here. More information about the case you can find in Case for 3D printing page.


General build v.3.1.4.0 released. What’s new: dosing pumps algorithm changes – now user can make up to 24 dosings per day for each pump. User interface changes.  SimACo firmware is here.


General build v.3.1.3.0 released. What’s new: added support to the new Flow sensors board v.1.0. Minor user interface changes.  SimACo firmware is here.


General build v.3.1.2.0 released. What’s new: increased data transmission stability between Android phone and SimACo controller. Some code parts were cleaned. Windows app is accommodated to fit large desktop monitors. SimACo firmware is here.


General build v.3.1.1.0 released. This build has a big changes to an Angry Fish application: big part of code was completely overwritten using Xamarin.Forms. There are two versions of Angry Fish application: for Windows and for Android (like in previous versions). Current Windows application can be installed on PC which runs Windows 10 version 16299.0 (Fall Creators update) or newer. SimACo firmware is here.


General build v.3.1.0.0 released. Angry fish for Windows is here. Angry fish for Android is here. SimACo firmware is here.


General build v.3.0.0.0 released. Angry fish for Windows is here. Angry fish for Android is here. SimACo firmware is here.


General build v.2.4 released. In this build:
Angry Fish Windows application updated to v.2.4.0.0. You can download new Angry Fish Windows version here.
Android application updated to version – v.1.2.0.0. Android application is here. Extract files before install.
Firmware also was updated to v.2.4, microcontroller hex file v.2.4 is here.

Released small updates for Windows and Android Angry Fish applications, both versions numbers remains the same. Angry Fish Windows version v.2.3.0.0 is here. Android application v.1.1.0.0 is here.

General build v.2.3 released. In this build:
Angry Fish Windows application updated to v.2.3.0.0. You can download new Angry Fish Windows version here.
Android application updated to version – v.1.1.0.0. Android application is here. Extract files before install.
Firmware also was updated to v.2.3, microcontroller hex file v.2.3 is here.

Font panel for 3D printing: STL file is here. Panel fits LCD and buttons board.

Angry Fish Windows application updated to v.2.2.0.0. Firmware also was updated to v.2.2. Created first version of Android application – v.1.0.0.0. You can download new Angry Fish Windows version here. Android application is here. Extract files before install. Microcontroller .hex file v.2.2 is here.

Angry Fish application updated to v.2.1.0.0. Firmware also was updated to v.2.1. You can download new Angry Fish version here. Extract files before install. Microcontroller .hex file v.2.1 is here.

2 Comments

  1. Cap. Ljubo Puntar

    Greetings,
    I wonder what the delivery time is ??

    Reply
    1. automateaqua (Post author)

      Hello, you mean delivery time of SimACo controller? In normal conditions it will take about 7 working days. But now due to corona virus situation it may take more time.

      Reply

Leave a Comment

Your email address will not be published. Required fields are marked *